WiFi Smart Plug for NA (2 Pack)

Safety Certificate & Overload Protection; Energy Monitoring;Remote Control & Family Sharing; Voice Control;Schedule & Timing Function; 2 Full Years Warranty & Technical Support;


Choose your country:


Safety Certificate & Overload Protection

This smart plug is made of PC flame resistant material and has gained ETL and FCC, RoHS certificate guarantee. It also has overload protection and can support any home devices whose current is under 15A.



Energy Monitoring

With the energy monitoring function, you can keep track of the energy of each appliance, and then cut down the electric bills effectively.


Remote control & Family Sharing

With the remote access, you can control it wherever you are. You can share the control with your family member to share the happiness and convenience together. This product is also kindly for the elderly.


Voice Control

The smart plug supports Alexa and Google Home for voice control. You can control it with Smart Life App on your smartphone or tablet at home or outside.


Schedule & Timing Function

Set automatic on/off schedules so that your devices can turn on/off at the time you want. With timing function, you can also set the light on/off after X mins/hours. No worry about wasting electricity.


Material: Fireproof ABS+PC
Single Product Size:85*40*51 mm
Single Product Weight:76g
WIFI Requirement:2.4GHz Only
Input Voltage:AC 125V 60Hz
Output:15A maximum
Work temperature: 0℃-40℃


(1 reviews)
by Brawn J


Look nice~

2018 Sep 26



You could:

1.1 Check whether the Smart Plug is powered on or not.

1.2 Check whether your mobile device is connected to 2.4G WIFI network.

1.3 Check your network connectivity. Make sure the router is working properly:

     1.3.1 If the router is dual-band router, select 2.4G network and then add Smart Plug.

     1.3.2 Enable the router’s broadcasting function.

     1.3.3 Configure the encryption method as WPA2-PSK and authorization type as AES, or set both as auto.

     1.3.4 Wireless mode cannot be 11n only.

     1.3.5 Check whether there are too many WIFI signals near the plug.

     1.3.6 Check whether the number of devices which router has connected reaches the amount limit. Please try to turn off some devices' WIFI function and configure the Smart Plug again.

     1.3.7 Check if router's wireless MAC filtering function is enabled. Remove the device from filter list and make sure the router allows the connection with the smart plug.

1.4 Make sure the password of your WIFI network entered in APP is corrected when you add the Smart Plug.

1.5 Make sure the Smart Plug is in ready for APP-Config: the indicator light blinks blue quickly (twice per second) for quick mode configuration, blinks blue slowly (once every 3 seconds) for AP mode configuration.

1.6 Repeat the APP-Config process.

1.7 Factory reset the Smart Plug and try to add it again.

The Smart Plug and the mobile device are required to be under same WIFI network (2.4G) when you add the Smart Plug for the first time.

After successful device configuration, you can remotely control the device through a 2G/3G/4G cellular network.

Open the APP, go to "My home"  page > click the button of device you have connected > click the  bottom in the right upper of the page > find the “Share devices” in the “Other” part. Now you can share the device with added family members.